begin work on pc side

1 files changed, 0 insertions, 303 deletions

diff --git a/source/template.c b/source/template.c
deleted file mode 100644
index 8665774..0000000
--- a/source/template.c
+++ /dev/null
@@ -1,303 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <gccore.h>
-#include <wiiuse/wpad.h>
-#include <inttypes.h>
-#include <string.h>
-
-#include "term.h"
-#include "state.h"
-
-static void *xfb = NULL;
-static GXRModeObj *rmode = NULL;
-
-#define TARGET_IOS 58
-
-static void initialize(int again) {
-  VIDEO_Init();
-
-  rmode = VIDEO_GetPreferredMode(NULL);
-  xfb = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
-
-  console_init(xfb, 20, 20, rmode->fbWidth - 20, rmode->xfbHeight - 20, rmode->fbWidth * VI_DISPLAY_PIX_SZ);
-
-  VIDEO_Configure(rmode);
-  VIDEO_SetNextFramebuffer(xfb);
-  VIDEO_ClearFrameBuffer(rmode, xfb, COLOR_BLACK);
-  VIDEO_SetBlack(FALSE);
-  VIDEO_Flush();
-  VIDEO_WaitVSync();
-  if (rmode->viTVMode & VI_NON_INTERLACE) {
-    VIDEO_WaitVSync();
-  }
-
-  fputs(TERM_CLEAR TERM_CUR_POS(2, 5), stdout);
-  printf("USB Gecko (newnewexi) test tool by figboot\n\n");
-
-  s32 iosver = IOS_GetVersion();
-  s32 iosrev = IOS_GetRevision();
-  printf("You're running IOS%" PRId32 " rev %" PRId32 ".\n", iosver, iosrev);
-
-  if (iosver != TARGET_IOS) {
-    if (again) {
-      printf(TERM_CSI("93m") "Failed to set up IOS" STR(TARGET_IOS) "! Bailing out.\n");
-      exit(1);
-    }
-
-    printf("Trying to load IOS" STR(TARGET_IOS) "...\n");
-
-    s32 res;
-    if ((res = IOS_ReloadIOS(TARGET_IOS)) < 0) {
-      printf(TERM_CSI("93m") "Failed to set up IOS" STR(TARGET_IOS) "! IOS_ReloadIOS returned %" PRId32 "\n", res);
-      exit(1);
-    }
-
-    free(MEM_K1_TO_K0(xfb));
-    initialize(1);
-  }
-}
-
-static void __attribute__((noreturn)) fatal_error(void) {
-  printf("The program will now abort due to the fatal error.\n");
-  exit(1);
-}
-
-int main(int argc, char **argv)
-{
-  void *state_data = NULL;
-  size_t state_data_size = 0;
-  struct et_next_state next;
-  const struct et_state *cur_state = NULL;
-  int stateres = 0;
-
-  u32 wpad_pressed;
-  u32 pad_pressed;
-
-  initialize(0);
-
-  WPAD_Init();
-  PAD_Init();
-
-  printf("Done initializing.\n");
-
-  /* Set up initial state */
-  cur_state = et_state_setup;
-
-  if (cur_state->private_size > 0) {
-    state_data = malloc(cur_state->private_size);
-    state_data_size = cur_state->private_size;
-    if (!state_data) {
-      printf("Failed to allocate private space for setup state %p!", cur_state);
-      fatal_error();
-    }
-  }
-
-  if ((stateres = et_state_init(cur_state, state_data, et_init_data_null)) < 0) {
-    printf("Failed to init setup state %p: %d\n", cur_state, stateres);
-    fatal_error();
-  }
-
-  while (SYS_MainLoop()) {
-    WPAD_ScanPads();
-    PAD_ScanPads();
-
-    wpad_pressed = WPAD_ButtonsDown(0);
-    pad_pressed = PAD_ButtonsDown(0);
-
-    if (wpad_pressed & WPAD_BUTTON_HOME || pad_pressed & PAD_BUTTON_START) {
-      printf("Exit button pressed. Goodbye!\n");
-      exit(0);
-    }
-
-    stateres = et_state_tick(cur_state, state_data, &next);
-    if (stateres < 0) {
-      printf("Failed to tick state %p: %d\n", cur_state, stateres);
-      fatal_error();
-    }
-
-    if (stateres > 0) {
-      /* tear down the old state first... */
-      et_state_cleanup(cur_state, state_data);
-
-      cur_state = next.state;
-
-      if (state_data_size < cur_state->private_size) {
-        void *new_data = realloc(state_data, cur_state->private_size);
-        if (!new_data) {
-          printf("Failed to allocate %zu bytes for new state %p\n", cur_state->private_size, cur_state);
-          fatal_error();
-        }
-
-        state_data = new_data;
-        state_data_size = cur_state->private_size;
-      }
-
-      if ((stateres = et_state_init(cur_state, state_data, next.init_data)) < 0) {
-        printf("Failed to init new state %p: %d\n", cur_state, stateres);
-        fatal_error();
-      }
-    }
-
-    VIDEO_WaitVSync();
-  }
-
-  return 0;
-}
-
-#if 0
-
-//---------------------------------------------------------------------------------
-int main(int argc, char **argv) {
-//---------------------------------------------------------------------------------
-
-	// Initialise the video system
-	VIDEO_Init();
-
-	// This function initialises the attached controllers
-	WPAD_Init();
-
-	// Obtain the preferred video mode from the system
-	// This will correspond to the settings in the Wii menu
-	rmode = VIDEO_GetPreferredMode(NULL);
-
-	// Allocate memory for the display in the uncached region
-	xfb = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
-
-	// Initialise the console, required for printf
-	console_init(xfb,20,20,rmode->fbWidth,rmode->xfbHeight,rmode->fbWidth*VI_DISPLAY_PIX_SZ);
-
-	// Set up the video registers with the chosen mode
-	VIDEO_Configure(rmode);
-
-	// Tell the video hardware where our display memory is
-	VIDEO_SetNextFramebuffer(xfb);
-
-	// Make the display visible
-	VIDEO_SetBlack(false);
-
-	// Flush the video register changes to the hardware
-	VIDEO_Flush();
-
-	// Wait for Video setup to complete
-	VIDEO_WaitVSync();
-	if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
-
-
-	// The console understands VT terminal escape codes
-	// This positions the cursor on row 2, column 0
-	// we can use variables for this with format codes too
-	// e.g. printf ("\x1b[%d;%dH", row, column );
-	printf("\x1b[2;0H");
-
-
-	printf("Hello World!\n");
-
-#define UGCHAN EXI_CHANNEL_1 /* slot B */
-#define UGDEV EXI_DEVICE_0   /* memory card */
-
-        if (EXI_Lock(UGCHAN, UGDEV, NULL) == 1) {
-          EXI_Select(UGCHAN, UGDEV, EXI_SPEED32MHZ);
-          uint32_t cmd = 0x90000000;
-          int res = 0;
-          if (EXI_Imm(UGCHAN, &cmd, sizeof(cmd), EXI_READWRITE, NULL) == 0) res |= 0x01;
-          if (EXI_Sync(UGCHAN) == 0) res |= 0x02;
-
-          if (res == 0) {
-            printf("Got: 0x%08x\n", cmd);
-            if (cmd != 0x04700000) {
-              printf("This is probably not a USB gecko...\n");
-            }
-          } else {
-            printf("EXI read/write error :( %#04x\n", res);
-          }
-
-          EXI_Deselect(UGCHAN);
-          EXI_Unlock(UGCHAN);
-        } else {
-          printf("Failed to lock EXI channel %d %d\n", UGCHAN, UGDEV);
-          goto waitexit;
-        }
-
-        for (int i = 0; i < 10; ++i) {
-          if (EXI_Lock(UGCHAN, UGDEV, NULL) == 0) {
-            printf("Failed to lock EXI for LED\n");
-            break;
-          }
-
-          int res = 0;
-
-          if (EXI_Select(UGCHAN, UGDEV, EXI_SPEED32MHZ) == 0) res |= 0x01;
-          uint32_t cmd = (i & 1) ? 0x80000000 : 0x70000000;
-          if (EXI_Imm(UGCHAN, &cmd, sizeof(cmd), EXI_WRITE, NULL) == 0) res |= 0x02;
-          if (EXI_Sync(UGCHAN) == 0) res |= 0x04;
-          if (EXI_Deselect(UGCHAN) == 0) res |= 0x08;
-
-          if (EXI_Unlock(UGCHAN) == 0) res |= 0x10;
-
-          printf("Error for LED: 0x%02x\n", res);
-
-          for (int j = 0; j < 60; ++j) {
-            VIDEO_WaitVSync();
-          }
-        }
-
-
-        for (int j = 0; j < 10; ++j) {
-        if (EXI_Lock(UGCHAN, UGDEV, NULL) == 1) {
-          printf("Sending a zillion bytes to your so-called \"usb gecko\"...\n");
-
-          for (int i = 0; i < 4096; ++i) {
-            EXI_Select(UGCHAN, UGDEV, EXI_SPEED32MHZ);
-
-            uint16_t cmd = 0xB000 | (uint16_t)(((i & 63) + 32) << 4);
-            if (EXI_Imm(UGCHAN, &cmd, sizeof(cmd), EXI_READWRITE, NULL) == 0) {
-              printf("Failed when writing %d\n", i);
-              goto error;
-            }
-
-            if (EXI_Sync(UGCHAN) == 0) {
-              printf("Failed sync when writing %d\n", i);
-              goto error;
-            }
-
-            if ((cmd & 0x0400) == 0) {
-              printf("Out of FIFO space at %d\n", i);
-              goto error;
-            }
-
-            EXI_Deselect(UGCHAN);
-            continue;
-error:
-            EXI_Deselect(UGCHAN);
-            break;
-          }
-
-          EXI_Unlock(UGCHAN);
-        }  else {
-          printf("Failed to lock EXI channel %d %d\n", UGCHAN, UGDEV);
-          goto waitexit;
-        }
-        }
-
-waitexit:
-        printf("That's all! Press HOME to exit.\n");
-
-	while(SYS_MainLoop()) {
-
-		// Call WPAD_ScanPads each loop, this reads the latest controller states
-		WPAD_ScanPads();
-
-		// WPAD_ButtonsDown tells us which buttons were pressed in this loop
-		// this is a "one shot" state which will not fire again until the button has been released
-		u32 pressed = WPAD_ButtonsDown(0);
-
-		// We return to the launcher application via exit
-		if ( pressed & WPAD_BUTTON_HOME ) exit(0);
-
-		// Wait for the next frame
-		VIDEO_WaitVSync();
-	}
-
-	return 0;
-}
-#endif